ARI-ZESA
| Application: | Cold -and cooling water installations, Heating installations, Drinking water and domestic water, Waste water, Swimming pool-installations, Power stations, Gas installations, Shipbuilding, etc. |
|---|---|
| Medium: | Cold water, warm water, hot water, drinking water, process water, etc. |
| eClass-No.: | 37010301 |
Valve-TableReferenceDetailsCross-section drawingData sheetOperating instructionCADChemical resistance
Legende:
= Approvals
= Approvals
| Figure | PN | DN | Material | Connection | Form | Temperature | Variation | |
|---|---|---|---|---|---|---|---|---|
|
|
22012 | PN 16 | DN 25-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | lever rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN100-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | lever rndisc of EN-JS1030 rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | worm gear rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN100-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | worm gear rndisc of EN-JS1030 rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | p-actuator - bar - single acting rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | p-actuator - bar - double acting rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | p-actuator - AIR TORQUE - single acting rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | p-actuator - AIR TORQUE - double acting rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | e-actuator - Rotork rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | e-actuator - Deufra rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | e-actuator - Auma rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | stainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | disc of EN-JS1030 rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | lever rnstainless steel disc rnEPDM-lining rnwith device for THErmo-Appliance |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | lever rndisc of EN-JS1030 rnEPDM-lining rnwith device for THErmo-Appliance |
|
|
22012 | PN 16 | DN 25-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | lever rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN100-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | lever rndisc of EN-JS1030 rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | worm gear rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN100-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | worm gear rndisc of EN-JS1030 rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | p-actuator - bar - single acting rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | p-actuator - bar - double acting rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | p-actuator - AIR TORQUE - single acting rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | p-actuator - AIR TORQUE - double acting rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | e-actuator - Rotork rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | e-actuator - Deufra rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | e-actuator - Auma rnstainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | stainless steel disc rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | disc of EN-JS1030 rnNBR-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | lever rnstainless steel disc rnNBR-lining rnwith device for THErmo-Appliance |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 80 °C | lever rndisc of EN-JS1030 rnNBR-lining rnwith device for THErmo-Appliance |
|
|
22012 | PN 16 | DN 25-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | lever rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN100-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | lever rndisc of EN-JS1030 rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | worm gear rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN100-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | worm gear rndisc of EN-JS1030 rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | p-actuator - bar - single acting rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | p-actuator - bar - double acting rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | p-actuator - AIR TORQUE - single acting rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | p-actuator - AIR TORQUE - double acting rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | e-actuator - Rotork rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | e-actuator - Deufra rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | e-actuator - Auma rnstainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | stainless steel disc rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | disc of EN-JS1030 rnFPM-lining |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | lever rnstainless steel disc rnFPM-lining rnwith device for THErmo-Appliance |
|
|
22012 | PN 16 | DN 25-DN500 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 150 °C | lever rndisc of EN-JS1030 rnFPM-lining rnwith device for THErmo-Appliance |
|
|
22012 | PN 16 | DN 25-DN 80 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | e-actuator - EA rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN100-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | e-actuator - EA rndisc of EN-JS1030 rnEPDM-lining |
|
|
22012 | PN 16 | DN 25-DN 80 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | e-actuator - EAY rnstainless steel disc rnEPDM-lining |
|
|
22012 | PN 16 | DN100-DN200 | EN-GJS-400-15, EN-JS1030 | elongated eyelets | Straight through | -10 °C to 130°C | e-actuator - EAY rndisc of EN-JS1030 rnEPDM-lining |
Steering wheel manufacturer rn(shown: central heating plant with four hot water boilers, each 4 MW)
Your reliability: rnARI-„GESA®“: integrally cast flange eyelets with rncontinuous thread |
Your reliability: rnAdditional protection against shaft leakage through rnchambered sealing mechanism |
Your cost-effectiveness: rnSave time through optimum handling... rn... e.g. through substantial savings in weight and height rn(in accordance with the german „Directive for Heating rnInstallations) |
Your cost-effectiveness: rn… e.g. through the „THEA“ thermal display: rnAccurate temperature measurement directly in the valve rndisc through the drilled shaft |